Bosch ME2.8 ECU Testing

Mercedes SL350 Bosch ECU 0261 208 353: Cooling Fan at Full Speed From Ignition-On

0 Comments

Bosch ME2.8 ECU TestingA cooling fan running at maximum speed from the moment the ignition was switched on, even on a cold start, was what a workshop in Bolton had found on this 2004 Mercedes-Benz SL350. They sent us the car’s Bosch engine ECU, 0261 208 353. Our testing confirmed the unit was faulty and repairable; we repaired it, and on the bench the stored fault code was cleared and the ECU ran without that code returning.

The ECU is a Bosch ME2.8; our page on Bosch ME2.8 work on Mercedes-Benz engine ECUs explains how we handle that type. A symptom that switches on with the ignition gives no let-up. This job ended on the opposite note: the ECU running on our bench with its fault code cleared, and the code staying away.

A cooling fan with no off switch

The workshop had diagnosed the SL350 extensively before the ECU came to us. Their finding was a fault code relating to the cooling fan motor. The fan ran at maximum speed as soon as the ignition was on, and a cold engine made no difference to it.

That finding belongs to this SL350. We would not treat a fan at full speed as a sign of an ECU fault in general. On this car, the workshop’s diagnosis is what sent the unit to our bench, and our part of the job started with testing it.

What our tests showed on the 0261 208 353

The ECU reached us by post, which is how every unit comes into our workshop from anywhere in the UK. As with each unit we receive, it was logged and inspected, then electrically tested, before fault-specific diagnostics.

Testing confirmed that the unit was faulty, and that it could be repaired. We set out findings before any chargeable work; on this job the customer gave their authorisation, and the repair went ahead.

Repaired, re-tested, and the fault code kept clear

Our engineers then repaired the ECU. Component-level work in our workshop is carried out under a microscope, using temperature-controlled rework equipment.

Re-testing followed, to confirm the repair had been successful. On the bench we cleared the stored fault code and had the ECU running, and the code did not come back. For a fault that had shown itself from the instant the ignition was on, that was the result to look for: the unit running, and the code no longer returning.

A repair here is only complete once the unit has passed final testing. The work done on this ECU then came with our 24-month warranty, which covers that specific repair and is not transferable.

Bosch 0261 208 353 beyond this SL350

0261 208 353 is on record with the Mercedes number A 112 153 57 79. It is also on record for the SL.

This page describes one job, so it is no guide to what another unit with this number needs. If either number is the one you are working from, the route is the same as on this job: testing first, findings next, and the decision on any chargeable work left to you. A number alone does not show whether a particular ECU is at fault.

For a quote, go to the Repair Form at our contact page. Engine ECUs from Mercedes-Benz with other Bosch numbers are reached through the make hub covering Mercedes-Benz engine ECUs, and you will find a wider sample of engine ECUs in What We Repair.

Leave a Reply

Your email address will not be published. Required fields are marked *